2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 x 2 The register is restored from the memory if a previously saved copy is available or is returned to the factory settings. To run a warm boot simultaneously press the following COLD BOOT keys Cold Boot forces you to close all open applications and renitize the system. Delete all RAM data, but keep the file system. The register is restored by a backup copy or returned to the factory settings. To perform a cold boot proceed as follows: Turn off the Falcon by pressing the ON/OFF button Remove the battery from the terminal Press and hold the SCAN key while pressing the RESET button Reassemble the battery Turn on the terminal by pressing the ON/OFF CLEAN BOOT button The Clean Boot makes a complete reset of the Falcon, then both the registry and the file system are reported to the factory settings To proceed with the clean boot, run the following steps: Run a cold boot Press and hold the keys 0 and ESC simultaneously and then press the ON/OFF button At this point a dialog box will appear: press the ENTER button to confirm For more information please feel free to contact us.