VELOCITY M2PV NVMe Adapter uses a USB 3.1 Gen 2 data bridge and a type C interface. Supports UASP acceleration protocol and theoretical data transmission speed is up to 10 Gbps. When using high-performance NVMe media, reading and writing capacity can exceed 900 Mb/s. CHARACTERISTICS Suitable for M.2 NVMe SSD, the size of the SSD is 2230/2242/2260/2280. The SSD B-Key is not supported. It comes with USB-C to USB-C and USB-C to USB-A cables, which can be used with USB-C / USB-A hosts. COMPATIBILITY Supports Windows/Mac/Linux systems, uses USB-C laptops and desktops or OTG enabled phones/tablets to directly access your files. This not only helps you transfer large amounts of data, but also expands capacity as an external case. DESSIPATION OF THE CALOUR The m.2 housing is fixed with a heat dissipation pad, a copper rod with holes on the PCBA board, the rib housing increases the heat dissipation area and the upper aluminum alloy cover quickly dissipates heat. The ORICO M.2 adapter automatically enters suspension mode after 10 minutes of inactivity to minimize unnecessary damage to your hard drive. No driver is required, it supports hot-swap, plug-and-play; blue light is on to remember that the external hard disk box is working. 1x Type C cable 1x USB-A type C cable 1x Screw set. 1x Silicone Thermal Bearing 1x User Manual.